Most salon chairs have a hydraulic system that needs hydraulic fluid. The design allows the hairstylists to move the chair upwards and downs to create an ideal height.
The make of these hydraulic chairs happens to be why the popularity in many salons and barbershops across the world. Besides that, these chairs are comfortable and elegant.
However, the lifting system usually fails after some time due to decreased hydraulic fluid. This is due to friction generation that causes the production of irritating grinding noise.
Therefore, the salon owners and employees must know how to put hydraulic fluid in a salon chair. It will help cut down on the cost of buying a new chair or hiring a professional for assistance.
We have created a guide on how to put hydraulic fluid in a salon chair for you. Take the time to read through each step before implementing the tips.
Contents
Tips for Refilling Hydraulic Fluid in a Salon Chair
Proper maintenance of the salon chair help to reduce the risk of hydraulic system failure. If you find it difficult to lower or lift the chair, refill it with hydraulic fluid.
Adding hydraulic fluid to a salon chair is straightforward. But it is quite important to consider the following helpful tips:
- Lower the Salon Chair
It is quite crucial to lowering the salon chair to its lowest position. The aim is to inspect the amount of hydraulic fluid in the chair.
Besides that, lowering the chair make it possible to access and remove the fill nut. Lifting the chair to the highest point will limit access and remove the fill nut using a wrench.
😀 Recommended Top 5 Salon Chairs in 2021
- Brand of the Oil
There is plenty of hydraulic fluid brands in the market. It is advisable to research and choose a highly reputable brand. We recommend using hydraulic jack oil from the auto manufacturer.
High-quality oil will improve the functionality of your hydraulic system. Therefore, take the time to inspect the quality before using the oil.
- Filling the Hydraulic System
Most hydraulic systems have a marked fill line. Ensure you do not put hydraulic fluid beyond the marked line. It will be more difficult to screw back the fill nut.
Besides that, excess fluid will result in constant leaking, making the hydraulic system fail yet again within a short lifespan.
- Eliminate Excess Air
It is quite important to get rid of the excess air out of the hydraulic system. This is usually done by lifting and lowering the salon chair repeatedly by pressing the foot pump.
Once the hydraulic fluid has been filled and air removed, then the hydraulic system’s functionality will be restored.
How Do You Fill Hydraulic Fluid in a Salon Chair?
Refilling the hydraulic system with hydraulic fluid is quite simple and easy. There is no need to hire an expert to offer assistance.
Here are the steps to follow:
- Step 1: Put the Chair in the Lowest Position
Putting the beauty salon chair in the lowest position is a crucial factor to consider. This is done by pressing the foot button downwards. Apply pressure until the barber chair resists further downwards movement.
- Step 2: Unscrew the Fill Nut
Locate the nut at the bottom of the hydraulic chair. Use an Alexa wrench to unscrew the hydraulic fill nut. We recommend reading the chair manual if you are finding it hard to locate the fill nut.
- Step 3: Fill the Salon Chair with Hydraulic Fluid
Put the hydraulic fluid in a spray bottle or use a funnel to fill the chair. This is only applicable after removing the fill nut. Keep in mind that the chair will need two to three quarts of the fluid.
- Step 4: Replace the Fill Nut
Use a simple wrench to tighten the hydraulic fill nut until it gets snug in position. It is advisable to replace the old fill nut with a new one to avoid any chances of fluid leaking.
- Step 5: Test the Salon Chair
Use the hydraulic system to either lift or lowers the hydraulic chair. This is done by pressing the foot button to lift and applying pressure downward to lower the chair.
The testing procedure is quite important since it reduces excess air present in the hydraulic system. If the chair continues to make irritating noise, then repeat the procedures.
How Does a Hydraulic Barber Chair Work?
Hydraulic barber chairs are fitted with a hydraulic system. The control system depends on the foot pump and hydraulic fluid to enhance its functionality.
The gas cylinder has a spring coil responsible for opening the valve when pressure is applied on the foot pump. It is the component where upward and downward movement emanates.
For instance, the lower point of the chair is attained when the client sits. On the other hand, the upward position is maintained when nobody sits on the chair. It happens since the spring coil will expand.
The mechanism of changing the height position of the salon chair depends entirely on the foot pump. If the button is released, then the valves will remain closed.
Salon employees are advised to lock the hydraulic system once the desired height is attained. The locking system prevents the chair from going downwards.
The good news is that most hydraulic chairs contain hydraulic fluid that promotes smooth upward and downward movement.
Hydraulic barber chairs that won’t go up or down happen due to a lack of hydraulic fluid. We recommend refilling the system with the fluid in case of such situations.
In Conclusion
Filling a salon chair with hydraulic fluid is a simple task. The speed of performing the task can be increased if you have all the necessary tools like wrench, funnel, and fluid.
The steps highlighted above have been tested and proven suitable when dealing with either hydraulic barber chair or salon chair.
However, we recommend using the chair manual since it helps to locate vital components. Each chair brand has a unique arrangement of the hydraulic system.
Other related articles